Plasma, Cut Master 60I
Specifications:
| Amperage Output | 10–60 A, continuously adjustable |
| Rated Output Power | 7.6 kW |
| Open-Circuit Voltage | 300 V |
| Input Voltage | 208–480 VAC ± 10% |
| Number of Phases | 1 ph or 3 ph |
| Supply Frequency | 50/60 Hz |
| Rated Duty Cycle | 50% @ 60A / 60% @ 50A / 100% @ 40A |
| Amperage Draw: | 43 A @ 208 V 1 ph / 26 A @ 208 V 3 ph |
| 39 A @ 230 V 1 ph / 23 A @ 230 V 3 ph | |
| 19 A @ 480 V 1 ph / 11 A @ 480 V 3 ph | |
| Enclosure Rating | IP23S |
| Work Lead w/Clamp | 20 ft |
| Gas Requirements | Compressed air |
| Operating Temp Range | 0°C–50°C |
| Input Pressure | 90–125 psi max |
| Required Airflow: | 300–500 scfh / 5–8.3 cfm |
| Recommended Cut | Cut 5/8 in. |
| Maximum Sever | 1 1/2 in |
| Pierce Rating | 5/8 in |
| Torch Duty Cycle | 100% at 60 A @ 400 scfh airflow |
| Torch Air Pressure | 75 psi |
| Torch Air Consumption | 6.7 cfm |
Input Power Cable and Plug:
- 9 ft. (2.7 m) 1 ph 8 AWG 3/C with NEMA 6-50P plug
- 9 ft. (2.7 m) 3 ph 12 AWG 4/C cable without plug
Website:
https://canadaweldingsupply.ca/products/thermal-dynamics-cutmaster-60i
Video:
Rates:
$150.00/Day
$350.00/Week
$925.00/Month
Categories
- Aerial Work Platforms (35)
- Compressed Air and Tools (26)
- Climate Control and Heat (74)
- Compaction and Paving Equipment (26)
- Concrete Tools (48)
- Earth Moving Equipment (57)
- Floor Care and Surface Prep (33)
- Fuel Tanks (3)
- Generators and Power Distribution (23)
- Jacks (9)
- Ladders (11)
- Lawn Care and Landscaping (51)
- Lighting (16)
- Material Handling (52)
- Pipe Threaders (26)
- Plumbing Tools (20)
- Power Tools (39)
- Pressure Washers (9)
- Pumps (22)
- Safety (3)
- Saws (21)
- Scaffolding (14)
- Shoring (7)
- Site Services and Fencing (37)
- Snow Removal (4)
- Specialty Items (7)
- Surveying Equipment (7)
- Traffic Control & Signs (48)
- Trailers & Towing (9)
- Utility Vehicles (1)
- Welding (19)
